Port Orford Cedar Arrows, Deluxe Coated Finish

SKU 54584

$95.99 to $179.99 inc. GST

Bundle and save: add Asiatic Bows or Recurve Bows, Quivers and Bow Strings and Rests or Thumb Rings or Tabs and Gloves or Leather Goods to get 12.5% off the bow, arrows, quivers and accessories.

Port Orford cedar arrows sealed in a deluxe polyurethane coat, sold as a set of 6 or 12 on 5/16 or 11/32 inch shafts, spined and cut to your bow and fletched in your colours.

Includes GST

Specifications

Pack size
6 arrows, 12 arrows
Diameter
5/16 (8mm), 11/32 (9mm)
Spine
Under 30lb, 30 - 35lb, 35 - 40lb, 40 - 45lb, 45 - 50lb, 50 - 55lb, 55 - 60lb, 60 - 65lb, Match my arrows to my new bow!
Arrow Length
26", 27", 28", 29", 30", 31", 32"
Glue-On Nock Colour
Black, White, Transparent Green
Index/Single Feather
Any colour, I'm not fussy!, White, Grey, Black, Brown, Copper, Purple, Electric Purple, Pink, Red, Burnt Orange, Fluro Orange, Golden Yellow, Fluro Yellow, Fluro Green, Green, Teal, Olive Green, Dark Green, Lake Blue, Blue, Dark Blue
Hen/Double Feather
Any colour, I'm not fussy!, White, Grey, Black, Brown, Copper, Purple, Electric Purple, Pink, Red, Burnt Orange, Fluro Orange, Golden Yellow, Fluro Yellow, Fluro Green, Green, Teal, Olive Green, Dark Green, Lake Blue, Blue, Dark Blue
Arrowhead
Aragorn Burnished Point (out of stock), Longobarda Burnished Point (out of stock), Brass Bullet Point, Quadrella (Bodkin Burnished Point)
Description

Coated cedar arrows in Port Orford cedar, finished in our deluxe polyurethane coat and fletched to your order in a set of six or a dozen. The coat seals the timber against moisture, wear and weather and leaves a polished surface with the grain still showing.

The 5/16 inch shaft suits traditional bows at the lighter end of the draw range, with spines from under 30lb up to the 50 to 55lb band. The thicker 11/32 inch shaft gives more stability behind a heavier bow, with spines from 40 to 45lb up to 60 to 65lb; in the dozen, the 11/32 spines start at 45 to 50lb.

Build your set

Pack 6 or 12 fletched arrows
Timber Port Orford cedar (Wood Database entry)
Finish Deluxe polyurethane coat
Diameter 5/16 inch or 11/32 inch
Spine on 5/16 Under 30lb, then 5lb bands from 30 to 35lb up to 50 to 55lb
Spine on 11/32 5lb bands from 40 to 45lb up to 60 to 65lb (45 to 50lb and up in the dozen)
New bow Tell us about your new bow through the spine menu and we match the arrows to it
Length Any whole inch from 26 to 32
Nock Glue-on, in black, white or transparent green
Feathers Index and hen colours picked separately, or left to us
Point Brass Bullet Point or Quadrella bodkin; the Aragorn and Longobarda burnished points are in the menu and marked when out of stock

From shaft to finished arrow

We sort the shafts so every set is matched within 10 grains, straighten each one by hand, coat it, and glue the feathers in line with a protector band at the base of the fletching that comes off easily. Each arrow is checked before it leaves, and the arrows are handcrafted in Australia.

Looking after them

  • Wipe each arrow with a dry cloth after use.
  • Keep them somewhere cool, dry and out of the sun.
  • Look over the feathers and points for wear now and then.

3Rivers Archery’s guide to wooden arrow care goes further. For bare timber without the coat, see Port Orford Cedar Arrows, Natural Finish. Read the right arrows for your bow before you pick a spine, or browse arrowheads for spare points.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Port Orford Cedar Arrows, Deluxe Coated Finish”

Your email address will not be published. Required fields are marked *